Crossbow LP Series (replaces M Series) Triaxial Accelerometer to PDAS-3 Cable

The following cable will connect a Crossbow LP Series 3 axis accelerometer to an Industrologic PDAS-3, with the X, Y, and Z axis' connected to PDAS-3 channels 1, 2, and 3 respectively.

The 3 outputs are at 2.5 volts with no acceleration, and go up and down from there to indicate + and - acceleration. 

5 pin .1" IDC male header to LP Series connector   DB15M connector to PDAS-3

pin 3, X ----------------------------------------- pin 1, channel 1
pin 4, Y ----------------------------------------- pin 2, channel 2
pin 5, Z ----------------------------------------- pin 3, channel 3
pin 2, ground ------------------------------------ pin 9, ground
pin 1, +5 ---------------------------------------- pin 10, +5




http://www.industrologic.com
log file