Industrologic TB-22

50 Pin IDC Header Breakout Board

Reference Manual

version 5/16/00

Industrologic, Inc.
3201 Highgate Lane
St. Charles, MO
63301
USA

Phone: (636) 723-4000
WWW: http://www.industrologic.com
Email: info@industrologic.com

Trademark and Copyright Information

TB-22 is a Trademark of Industrologic, Inc. 2000
This document is Copyright (c) 2000 by Industrologic, Inc.
All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying or scanning, for any purpose other than the personal use by the purchaser of this product. Industrologic, Inc. reserves the right to revise this document at any time without obligation to notify any person of such revision. Industrologic, Inc. assumes no responsibility for any errors that may appear in this document.

Warning/Disclaimer

Whereas effort has been made to make the information in this document as useful and accurate as possible, Industrologic, Inc. assumes no responsibility for the application, usefulness, or completeness, of the information contained herein. Under no circumstance will Industrologic, Inc. be responsible or liable for any damages or losses including indirect or consequential damages or losses arising from either the use of any information contained within this manual or the use of any products or services referenced within this manual.

Industrologic, Inc. reserves the right to change any product's features, specifications, documentation, warranties, fee schedules, and conditions at any time and without notice.

Industrologic products are provided as printed circuit board level assemblies. Some Industrologic products may include mechanical packaging assessories which are provide for the purchaser's convenience, and are not intended to be final assembly enclosures.

Industrologic products are provided with the understanding that the purchaser will determine fitness for any particular application as well as achieve compliance with any particular specifications or regulations as required or desired for that application.

Warranty

Industrologic, Inc. products are warranted to be free from defects in workmanship or material under normal use and service for a period of one year from date of purchase. Industrologic's warranty is to the original purchaser only, but is extended to you by the Distributor or OEM from whom you purchased the product.

Industrologic's obligation under this Warranty is limited to replacement with a new or repaired unit to the original purchaser. The unit must be returned, and replacements obtained from Industrologic, Inc. or the Distributor or OEM from whom it was purchased.

This warranty will not apply if, in the judgment of Industrologic, Inc., damage or failure of the product has resulted from accident, alteration, misuse, abuse, connection to or operation with incompatible signals or power sources, or improper installation.

Under no circumstances shall Industrologic, Inc. be liable to purchaser or any third party for any loss of profits or other direct or indirect costs, expenses, losses, or consequential damages arising out of or as a result of any defects in or failure of Industrologic products or any part or parts thereof.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR ANY OTHER MATTER.

Return and Repair Policy

Products purchased in single piece quantities may be returned, if in resellable condition, for a full refund of the purchase price only, to the original purchaser, within 30 days of purchase.

Products must be returned by original purchaser with a Return Materials Authorization (RMA) number issued by Industrologic, Inc. or the Distributor or OEM from whom it was purchased, authorizing its return. Current repair or replacement fees and procedures will be related during the issue of the RMA number.

Warranty or repair units must be returned with postage and insurance paid by purchaser. Industrologic, Inc. is not responsible for damages or loss during shipment.

Industrologic TB-22

50 Pin IDC Header Breakout Board

The Industrologic TB-22 is a screw terminal breakout board for the industry standard 50 pin male IDC header connector present on industrial digital I/O boards and other units that interface to solid-state relay racks and modules. This board can be used when connections need to be made to the logic level signals present on these boards or units.

Mechanical specifications

Single-sided .062" FR-4 glass epoxy printed circuit board.

P.C. Board Dimensions:

Using the TB-22

The TB-22 has been been designed specifically for the pin-out of the industry standard solid-state relay connections and therefore does not have individual connections to all 50 pins of the connector. Rather, it has connections to all 24 standard signal pins, four ground connections, and two connections to +5 volts.

The 50 pin female to female IDC header cable used to connect the TB-22 to digital I/O boards and units must be properly oriented so that pin 1 of each connector matches with that of its mating connector on the TB-22 and I/O board or unit.

Note that the signals present on the screw terminals of the TB-22 when connected to most I/O boards and units compatible with this standard are logic level signals and are not suitable for high voltage or high current connections. Also note that the current drawn from the +5 volt signal will be limited to that specified by the manufacturer of the I/O board or unit.

Schematic Diagram

end of manual
log file