Home    Industrologic, Inc. (636) 723-4000    Products Page


Silicon Designs 2412 Accelerometer to PDAS-3 Cable

The following cable will connect a Silicon Desings 2412 3 axis accelerometer to an Industrologic PDAS-3, with the X, Y, and Z axis' connected to PDAS-3 channels 1, 2, and 3 respectively.

Each axis of the 2412 has + and - outputs for balanced inputs, but since PDAS-3 inputs are single-ended, only the + outputs are used.

The 3 outputs are at 2.5 volts with no acceleration, and go up and down from there to indicate + and - acceleration. 

20 pin .1" IDC header to 2412         DB15M connector to PDAS-3

pin 13, +X -------------------------- pin 1, channel 1
pin 16, +Y -------------------------- pin 2, channel 2
pin 10, +Z -------------------------- pin 3, channel 3
pin 17, ground ---------------------- pin 9, ground
pin 18, +5 -------------------------- pin 10, +5




www.industrologic.com
log file