SBC-1 Product Page
Hardware and Software Reference Manuals, Software Downloads
SBC-1 Single Board Computer/Controller - $219
SBC-1-AD12 with 12 bit A/D - $239
The SBC-1 provides the control system designer with a complete development package that was designed from the ground up to make their system prototyping, development, and final assembly quick and easy. The SBC-1 owes its ability to provide this simplicity and convenience by providing the following standard features:
- Venerable 80C51 processor with 8K of EEPROM and 8K of RAM
- Powerful ROM based monitor and developer interface including commands that allow the SBC-1 to be operated as a "slave" to any RS-232 device
- 50 digital I/O signals when used in its maximum I/O configuration (24 logic level inputs, 2 interrupt inputs, 24 open collector outputs)
- One 0 to 5 volt 8 bit analog to digital converter input (or 12 bit with the SBC-1-AD12)
- 50 pin I/O connector to connect industry standard I/O "brick" modules and racks where each one of 24 I/O signals can be selected as an input or output
- Terminal block connectors to allow quick connection to many of the signals
- Two RS232 physical ports with DB9 connectors
- Real-time clock that can be set or read from the monitor or TinyBASIC
- Serial upload and download capability to store and retrieve user programs
- On board specially enhanced TinyBASIC programming language with functions and variables defined for the SBC-1 specific I/O, serial, and real-time clock
- System I/O routines in a "call table" toolbox for user access
- All chips installed in sockets for easy replacement if necessary
- The SBC-1 circuit board
- A serial port cable for connection to a PC compatible computer
- A wall-block power supply
- Host computer software and programming examples
- An extensive hardware and software reference manual
www.industrologic.com