RC5120 Product Page
Hardware and Software Reference Manuals, Software Downloads
RC5120 20 Relay Programmable Relay Controller - $349
RC5120 Enclosure - $80
RC5120 shown in its optional ABS enclosure
The Industrologic RC5120 is an Atmel AT89C4051 microcontroller based
board designed to be a complete industrial controller assembly that
is easy to program and to connect to external signals. In addition
to twenty high current Form "C" relays, it includes a digital logic
level signal, an RS-232 port, an on-board software readable pushbutton
switch, and a software controllable LED.
The RC5120 includes, pre-programmed into the microcontroller, a special version of Tiny Machine Basic, Industrologic's simple programming language, written for the hardware on the RC5120. By using this language the user can quickly and easily program the RC5120 to perform any number of control tasks, including controlling the relays in response to serial commands from a host computer. The microcontroller chip can also be re-programmed using any number of software development tools available for similar Atmel microcontrollers.
The RC5120 printed circuit board is designed to mount directly into the Bud Industries PRM-14460 ABS rack/table mount enclosure. This enclosure can be quickly converted from rack mounting to table top use and includes all required brackets for both configurations.
- Based on the Atmel AT89C4051 microcontroller operating at 11.0592 MHZ
- Convenient screw terminal block connections for all relay and digital I/O connections
- Serial RS-232 port with true RS-232 interface and DB9F connector matching PC compatibles
- 20 10 amp Form "C" relays with LED indicators for on/off status
- 1 digital logic level signal usable as an output or a interrupt input
- General purpose software readable pushbutton switch and software controllable LED
- 512 byte EEPROM for storage of small programs or configuration information
- On-board +5 volt power supply including screw terminal connection for external circuitry
- On-board +12 volt power supply for relay control
- Pin-type power connector for easy connection to wall block power supplies
- Tiny Machine Basic programming language for the RC5120 programmed into the microcontroller
- EEPROM based AT89C4051 can be re-programmed using common Intel 8051/Atmel AT89Cxx51 software development tools and device programmer
The RC5120 package is shipped complete with all items necessary to immediately begin application development:
- The RC5120 circuit board
- A serial port cable for connection to a PC compatible computer
- A wall-block power supply
- Host computer software and programming examples
- Hardware and software reference manuals
www.industrologic.com