RC51 Product Page
Hardware and Software Reference Manuals, Software Downloads
RC51 8 Relay Programmable Relay Controller - $139
RC51 Enclosure - $30
The Industrologic RC51 is a microcontroller based programmable relay controller
designed to be a complete industrial controller assembly that is easy to
program and connect to external signals. It includes a large bank of high
current relays as well as digital input circuitry needed by many common control
applications. The RC51 can be programmed as a standalone controller using its
on-board Tiny Machine Basic programming language or it can be used as an
RS-232 serial data acquisition board.
- Based on the Atmel AT89C4051 microcontroller operating at 11.0592 MHZ
- Convenient screw terminal block connections for all relay and digital I/O connections
- Serial RS-232 port with true RS-232 interface and DB9F connector matching PC compatibles
- Eight 10 amp Form "C" relays with LED indicators for on/off status
- Four digital logic levels signals usable as inputs or outputs including one interrupt signal
- General purpose software readable pushbutton switch and software controllable LED
- 512 byte EEPROM for storage of small programs or configuration information
- On-board +5 volt power supply including screw terminal connection for external circuitry
- Pin-type power connector for easy connection to wall block power supplies
- Tiny Machine Basic programming language for the RC51 programmed into the microcontroller
- EEPROM based AT89C4051 can be reprogrammed using common Intel 8051/Atmel AT89Cxx51 software development tools and device programmer
The RC51 package is shipped complete with all items necessary to immediately begin application development:
- The RC51 circuit board
- A serial port cable for connection to a PC compatible computer
- A wall-block power supply
- Host computer software and programming examples
- Hardware and software reference manuals
www.industrologic.com