Macro232   Serial port controllable macros - $39 - Play predefined key macros based on characters received at one of the serial ports, and send and send character string commands back to the serial port to control the device.

HTTP232   Control RS-232 devices via the web - $49 - Compact web server that can interpret special HTTP requests to send character string commands to the serial ports.

Sched232   Task Scheduler for RS-232 devices - $29 - Task scheduler that can send character string commands to the serial port to control RS-232 devices.

SBC1-TB48   48 digital I/O terminal block board for the SBC-1 - $69 - Add screw terminal block connections for all 24 digital inputs and all 24 digital outputs.

SBC1-I24   24 digital input 50 pin header adapter - $24 - Add a second Opto-22 compatible 50-pin digital I/O header to the SBC-1 with this assembly.

LED-8   8 character LED display for the SBC-1 - $129 - Easy to interface, and easy to program using software included the SBC-1.

Programming and Interfacing the SBC-1   The companion book - $20 - Shows connections and programming examples for all of the SBC-1 I/O signals and on-board hardware devices.

T51-LED    Alphanumeric LED Display Board for the T51 - $64 - Alphanumeric digits and "colon" LED's for clock/timer, includes mounting hardware

T51-LCD    Front panel LCD/Switch Board for the T51 - $54 - Turns a T51 into a custom "serial LCD" or mini terminal, includes mounting hardware

T51-RSL    Relay/Switch/LED Board for the T51 - $44 - General purpose interface for the T51, high current relay, 8 position DipSwitch, 8 LED's, includes mounting hardware

IC51   Atmel AT89C51 based Single Board Computer - $169 - Eight 10 amp relays, eight 12-bit A/D inputs, nine logic level I/O signals, two serial ports, LCD and keypad support hardware, development software, and Tiny Machine Basic (with LCD support). IC51 Enclosure - $30, machined ABS plastic enclosure.

DR51   Atmel AT89C4051 based Single Board Computer - $79 - Two 10 amp relays, eight logic level I/O signals, serial port, development software, and Tiny Machine Basic (with switch matrix keypad support). DR51 Enclosure - $20, machined ABS plastic enclosure.

TC51   Atmel AT89C4051 based Single Board Computer - $139 - Four 10 amp relays, two 12-bit A/D inputs, four logic level I/O signals, two serial ports, LCD support hardware, development software, and Tiny Machine Basic (with LCD support)

RC51   Atmel AT89C4051 based 8 Relay Programmable Relay Controller - $139 - Eight 10 amp relays, four logic level I/O signals, serial port, development software, and Tiny Machine Basic. Identical form-factor as SI51. RC51 Enclosure - $30, machined ABS plastic enclosure.	SI51   Atmel AT89C4051 based Programmable Switch Input Controller - $109 - 16 switch/contact closure inputs, four logic level I/O signals, serial port, development software, and Tiny Machine Basic. Identical form-factor as RC51. SI51 Enclosure - $30, machined ABS plastic enclosure.
RC5120   Atmel AT89C4051 based 20 Relay Programmable Relay Controller - $349 - Twenty 10 amp relays, one logic level I/O signal, serial port, development software, and Tiny Machine Basic. Identical form-factor as SI5150. RC5120 Enclosure - $80, rack mount machined ABS plastic enclosure.	SI5150   Atmel AT89C4051 based Programmable Switch Input Controller - $319 - 50 switch/contact closure inputs, one logic level I/O signal, serial port, development software, and Tiny Machine Basic. Identical form-factor as RC5120. SI5150 Enclosure - $80, rack mount machined ABS plastic enclosure.

FC16C08IFT   Flex cable assembly - $15 - Used to connect user selected LCD modules to the IC51 and TC51.

MT1   LCD based mini-terminal - A simple and inexpensive operator interface. MT1-I - $69: For easy connection to Industrologic products, MT1 Enclosure - $10, machined ABS plastic enclosure.

LCD162BL   LCD module with cable - $39 - A large character backlighted LCD module and cable assembly that is plug compatible with the IC51 and TC51 LCD connectors.

KP16   Switch matrix keypad with cable - $24 - A 16 button keypad and cable assembly that is plug compatible with the DIO51, IC51, DR51, and T51 digital I/O signal connectors.

LED4N   4 character numeric LED display - $34 - Easy interface to nearly any microcontroller board or Programmable Logic Controller (PLC).

TB-22   Breakout board - $54 - Opto-22 compatible 50-pin digital I/O breakout board with 18" cable included. Provices additional terminal block connections for the SBC-1, SIO-1000, and other products.

USDAC12    Universal Serial 12 Bit Digital to Analog Converter - $19 - Screw terminal connections, easy to add analog output capability to most microcontroller and other logic circuits.

UPDAC8    Universal parallel 8 Bit digital to analog converter - $49 - Screw terminal connections, easy to add analog output capability to most microcontroller and other logic circuits UPDAC8 Enclosure - $20, machined ABS plastic enclosure.

SMD-12   Stored Message Display unit - $259 - Display messages with switch closures or with serial data. Does not require a computer to enter or display messages! Metal enclosure with built-in bezel included.

RS51-SPR-RELAY   RS-232 Serial Relay - $59 - Simple RS-232 controlled relay board with 10 amp contacts and addressability.

RIO-8   Relay I/O board - $69 - 8 high current relays, screw terminal connections, easy to use with nearly all Industrologic controllers and many other circuits. Jumperable for open collector and logic level drive.

URB-4    4 section universal relay board - $44 - One amp relay, screw terminal connections, easy to use with nearly any microcontroller or logic circuit. Both active-high and active-low logic level drive connections.

UOB-4    4 section universal opto-isolator board - $34 - Screw terminal connections, easy to use with many microcontroller and logic circuits.

UOB8    8 channel universal opto-isolator board - $59 - Screw terminal connections, easy to use with many microcontroller and logic circuits. Each channel may be used individually as input or output isolation circuit. UOB8 Enclosure - $20, machined ABS plastic enclosure.

SGAU   Universal Strain Gauge Amplifier - $69 - A miniature printed circuit board assembly designed to amplify strain gauge bridges. Bipolar or single ended operation, screw terminal block connections.

UWDT   Universal Standalone Watchdog Timer/Monitor - $49 - Digital logic and RS-232 watchdog timer and monitor with 10 amp relay, adjustable trigger/relay times, RS-232 pass-through, and terminal block connections for relay, logic level trigger, and power. UWDT-ETR, ETT, or ETB - $54 (Extended time versions.) UWDT Enclosure - $20, machined ABS plastic enclosure.

RC51-IRPKG   RC51 Infrared Control Package - $169 - RC51 with eight 10 amp relays, Tiny Machine Basic with SIRCS support, an infrared sensor module, a pre-loaded infrared control program, and a universal handheld remote control unit.

DB9MMNM   DB9M-M Gender Changer/Null Modem Adapter - $15 - Used for communication between two Industrologic products or Industrologic products and other devices, e.g. BetaBrite®, PC based SBC, etc.

BetaBrite® Classic^TM display packages - Large multi-color LED display unit with a serial port that can be connected to many Industrologic products.

RS51-SPR-BETA   BetaBrite® Protocol Converter - $59 - Turns the BetaBrite Classic into an extremely easy to use RS-232 serial LED display, while adding a high current relay as well.

Grandwell Industries SLC16H-IR display packages - Large multi-color LED display unit with a serial port that can be connected to many Industrologic products.

Pro-Lite PL-M2014R display packages - Large multi-color LED display unit with a serial port that can be connected to many Industrologic products.

UWDTPC   OEM Universal Standalone Watchdog Timer - $25 - Internal watchdog timer for single board computers, PC's, and Mini ITX systems. Monitors disk drive activity LED, digital output, or RS-232 from serial port connector. Powered from disk drive power connector.

PDAS-3   Portable Data Acquisition System - $1250 - A ruggedized, self-contained data logger originally designed for military parachute air drop testing. Extra PinSwitch cables, $4. Complete unit refurbishment with warranty extension, $325. Upgrade to latest internal software, $50.

PDAS-LITE   Portable Data Acquisition System - $250 - A ruggedized, self-contained data logger designed for military parachute air drop testing. Contains many of the features of our original PDAS-3 unit.

VSI-1000   Vertical Speed Indicator - $225 - A ruggedized, VSI/voltage output altimeter designed to replace mechanical means of determining vertical speed.

SGAMP-2   Strain Gauge Amplifier - $50 - A miniature printed circuit board assembly designed to amplify strain gauge bridges. SGAMP-2-VRG - $60, with gain adjustment.

DCDC   DC to DC Converter - A printed circuit board assembly with an industry standard DC to DC converter module and screw terminal block connections. DCDC-15W4812 - $119: 15 watts/48V in/12V out, DCDC-25W4812 - $129: 15 watts/48V in/12V out. Other power ratings and input/output voltages available.

PinSwitch - $59 - A major component in Industrologic's PDAS-3. Snap-action microswitch mounted on a specially machined aluminum block that allows the switch to be activated by a 1/8th inch diameter "pin". Extra PinSwitch cables, $4.

www.industrologic.com