Industrologic, Inc. reserves the right to change any product's features, specifications, documentation, warranties, fee schedules, and conditions at any time and without notice.
Industrologic products are provided as printed circuit board level assemblies. Some Industrologic products may include mechanical packaging assessories which are provide for the purchaser's convenience, and are not intended to be final assembly enclosures.
Industrologic products are provided with the understanding that the purchaser will determine fitness for any particular application as well as achieve compliance with any particular specifications or regulations as required or desired for that application.
Industrologic's obligation under this Warranty is limited to replacement with a new or repaired unit to the original purchaser. The unit must be returned, and replacements obtained from Industrologic, Inc. or the Distributor or OEM from whom it was purchased.
This warranty will not apply if, in the judgment of Industrologic, Inc., damage or failure of the product has resulted from accident, alteration, misuse, abuse, connection to or operation with incompatible signals or power sources, or improper installation.
Under no circumstances shall Industrologic, Inc. be liable to purchaser or any third party for any loss of profits or other direct or indirect costs, expenses, losses, or consequential damages arising out of or as a result of any defects in or failure of Industrologic products or any part or parts thereof.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR ANY OTHER MATTER.
Products must be returned by original purchaser with a Return Materials Authorization (RMA) number issued by Industrologic, Inc. or the Distributor or OEM from whom it was purchased, authorizing its return. Current repair or replacement fees and procedures will be related during the issue of the RMA number.
Warranty or repair units must be returned with postage and insurance paid by purchaser. Industrologic, Inc. is not responsible for damages or loss during shipment.
Connector pinout matches the IOEXP connector of an Industrologic SBC-1 single board computer for easy connection to these computers, and operates on the 5 and 12 volt supplies provided through the connector.
Shipped complete with ribbon cable to quickly and immediately connect to an SBC-1 and begin displaying messages.
Note: Although the LED-8 obtains its power from the connection to the SBC-1, the power supply shipped with the SBC-1 does not supply sufficient current for both devices when used in most applications. A power supply rated at 12 volts regulated or unregulated at one amp is suggested when powering both devices.
Note: Although the LED-8 obtains its power from the connection to the SBC-1, the power supply shipped with the SBC-1 does not supply sufficient current for both devices when used in most applications. A power supply rated at 12 volts regulated or unregulated at one amp is suggested when powering both devices.
Insure that the SBC-1 is powered by a power supply with sufficient current to power both the SBC-1 and the LED-8. The power supply shipped with the SBC-1 may not supply sufficient current for both devices when used in some applications where the messages have many segments on at the same time for long periods of time. A power supply rated at 12 volts DC regulated or unregulated at one amp is suggested when powering both devices.
end of manual