Industrologic LCD162BL

LCD Module with cable

Reference Manual

version 9/2/05

Industrologic, Inc.
3201 Highgate Lane
St. Charles, MO
63301
USA

Phone: (636) 723-4000
WWW: http://www.industrologic.com
Email: info@industrologic.com

Trademark and Copyright Information

LCD162BL is a Trademark of Industrologic, Inc. 2004
This document is Copyright (c) 2004 by Industrologic, Inc.
All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying or scanning, for any purpose other than the personal use by the purchaser of this product. Industrologic, Inc. reserves the right to revise this document at any time without obligation to notify any person of such revision. Industrologic, Inc. assumes no responsibility for any errors that may appear in this document.

Warning/Disclaimer

Whereas effort has been made to make the information in this document as useful and accurate as possible, Industrologic, Inc. assumes no responsibility for the application, usefulness, or completeness, of the information contained herein. Under no circumstance will Industrologic, Inc. be responsible or liable for any damages or losses including indirect or consequential damages or losses arising from either the use of any information contained within this manual or the use of any products or services referenced within this manual.

Industrologic, Inc. reserves the right to change any product's features, specifications, documentation, warranties, fee schedules, and conditions at any time and without notice.

Industrologic products are provided as printed circuit board level assemblies. Some Industrologic products may include mechanical packaging accessories which are provide for the purchaser's convenience, and are not intended to be final assembly enclosures.

Industrologic products are provided with the understanding that the purchaser will determine fitness for any particular application as well as achieve compliance with any particular specifications or regulations as required or desired for that application.

Warranty

Industrologic, Inc. products are warranted to be free from defects in workmanship or material under normal use and service for a period of one year from date of purchase. Industrologic's warranty is to the original purchaser only, but is extended to you by the Distributor or OEM from whom you purchased the product.

Industrologic's obligation under this Warranty is limited to replacement with a new or repaired unit to the original purchaser. The unit must be returned, and replacements obtained from Industrologic, Inc. or the Distributor or OEM from whom it was purchased.

This warranty will not apply if, in the judgment of Industrologic, Inc., damage or failure of the product has resulted from accident, alteration, misuse, abuse, connection to or operation with incompatible signals or power sources, or improper installation.

Under no circumstances shall Industrologic, Inc. be liable to purchaser or any third party for any loss of profits or other direct or indirect costs, expenses, losses, or consequential damages arising out of or as a result of any defects in or failure of Industrologic products or any part or parts thereof.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR ANY OTHER MATTER.

Return and Repair Policy

Products purchased in single piece quantities may be returned, if in resellable condition, for a full refund of the purchase price only, to the original purchaser, within 30 days of purchase.

Products must be returned by original purchaser with a Return Materials Authorization (RMA) number issued by Industrologic, Inc. or the Distributor or OEM from whom it was purchased, authorizing its return. Current repair or replacement fees and procedures will be related during the issue of the RMA number.

Warranty or repair units must be returned with postage and insurance paid by purchaser. Industrologic, Inc. is not responsible for damages or loss during shipment.

Industrologic LCD162BL

LCD module with cable

The Industrologic LCD162BL is an LCD module and ribbon cable assembly based on an industry standard transflective, 6 o'clock viewing angle, 16 character by 2 line LCD module that has a large viewing area, large characters, and yellow/green LED backlighting.

The ribbon cable is terminated with a .1" female header connector, and is is plug compatible with the Industrologic IC51 and TC51 LCD connectors.

Power for the backlighting is taken from the +5 logic power supply connection on the module, and the module has on-board current limiting for the LED backlighting. No external components or connections are required.

Mechanical specifications

Module size: Width (side to side): 122 mm (4.8") Height (top to bottom): 44 mm (1.73")
Thickness (front to back): 11 mm (0.43")
Viewing area: Width (side to side): 99 mm (3.9") Height (top to bottom): 24 mm (0.945")
Character size: Width (side to side): 4.84 mm (0.19") Height (top to bottom): 9.66 mm (0.38")

Electrical Specifications

Power supply voltage: 4.5 to 5.5 volts DC Power supply current (including backlighting): 260mA typical, 390mA maximum

The LCD162BL is based on an industry standard LCD module with a KS0066 or equivalent on-board controller chip, giving the module a typical logic level parallel interface, contrast voltage connection, signal timing, and commands.

Pins 1 through 14 of the module run through the ribbon cable to a 16 pin .1" female header connector, which matches the 16 pin header on Industrologic single board computers with an LCD connector. Since power for the backlighting is taken from the +5 logic power supply, pins 15 and 16, which are normally the backlighting LED power connections on 16 pin interfaces, are not needed at the connector.

end of manual
log file