Industrologic KP16
16 Button Switch Matrix Keypad with cable
Reference Manual
version 1/1/08
Industrologic, Inc.
3201 Highgate Lane
St. Charles, MO
63301
USA
Phone: (636) 723-4000
WWW: http://www.industrologic.com
Email: info@industrologic.com
Trademark and Copyright Information
KP16 is a Trademark of Industrologic, Inc. 2004
This document is Copyright (c) 2004 by Industrologic, Inc.
All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying or scanning, for any purpose other than the personal use by the purchaser of this product. Industrologic, Inc. reserves the right to revise this document at any time without obligation to notify any person of such revision. Industrologic, Inc. assumes no responsibility for any errors that may appear in this document.
Warning/Disclaimer
Whereas effort has been made to make the information in this document as useful and accurate as possible, Industrologic, Inc. assumes no responsibility for the application, usefulness, or completeness, of the information contained herein. Under no circumstance will Industrologic, Inc. be responsible or liable for any damages or losses including indirect or consequential damages or losses arising from either the use of any information contained within this manual or the use of any products or services referenced within this manual.
Industrologic, Inc. reserves the right to change any product's features, specifications, documentation, warranties, fee schedules, and conditions at any time and without notice.
Industrologic products are provided as printed circuit board level assemblies. Some Industrologic products may include mechanical packaging accessories which are provide for the purchaser's convenience, and are not intended to be final assembly enclosures.
Industrologic products are provided with the understanding that the purchaser will determine fitness for any particular application as well as achieve compliance with any particular specifications or regulations as required or desired for that application.
Warranty
Industrologic, Inc. products are warranted to be free from defects in workmanship or material under normal use and service for a period of one year from date of purchase. Industrologic's warranty is to the original purchaser only, but is extended to you by the Distributor or OEM from whom you purchased the product.
Industrologic's obligation under this Warranty is limited to replacement with a new or repaired unit to the original purchaser. The unit must be returned, and replacements obtained from Industrologic, Inc. or the Distributor or OEM from whom it was purchased.
This warranty will not apply if, in the judgment of Industrologic, Inc., damage or failure of the product has resulted from accident, alteration, misuse, abuse, connection to or operation with incompatible signals or power sources, or improper installation.
Under no circumstances shall Industrologic, Inc. be liable to purchaser or any third party for any loss of profits or other direct or indirect costs, expenses, losses, or consequential damages arising out of or as a result of any defects in or failure of Industrologic products or any part or parts thereof.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR ANY OTHER MATTER.
Return and Repair Policy
Products purchased in single piece quantities may be returned, if in resellable
condition, for a full refund of the purchase price only, to the original
purchaser, within 30 days of purchase.
Products must be returned by original purchaser with a Return Materials Authorization (RMA) number issued by Industrologic, Inc. or the Distributor or OEM from whom it was purchased, authorizing its return. Current repair or replacement fees and procedures will be related during the issue of the RMA number.
Warranty or repair units must be returned with postage and insurance paid by purchaser. Industrologic, Inc. is not responsible for damages or loss during shipment.
Industrologic KP16
16 Button Switch Matrix Keypad with cable
The Industrologic KP16 is a 16 button switch matrix keypad arranged in four
rows of four columns with connections to eight solder pads with 0.1 inch
spacing. Attached to the solder pads is a 12 inch long ribbon cable terminated
with a 0.1 inch female header connector.
The KP16 is plug compatible with the Industrologic DIO51, IC51, DR51, and T51 digital
I/O signal connectors, and can be connected to other microcontroller boards
that have eight digital I/O signals available at a 0.1 inch male header connector.
Electrical Specifications
The switch contacts are rated at 24 volts DC maximum and 20 milliamperes
maximum. The switch contact resistance is 200 ohms maximum.
Mechanical specifications
The KP16 has a raised button area designed for back mounting with four number two screws.
end of manual
