Industrologic DCDC
DC to DC Converter Module Board
Reference Manual
version 1/1/04
Industrologic, Inc.
3201 Highgate Lane
St. Charles, MO
63301
USA
Phone: (636) 723-4000
WWW: http://www.industrologic.com
Email: info@industrologic.com
Trademark and Copyright Information
DCDC is a Trademark of Industrologic, Inc. 2004
This document is Copyright (c) 2004 by Industrologic, Inc.
All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying or scanning, for any purpose other than the personal use by the purchaser of this product. Industrologic, Inc. reserves the right to revise this document at any time without obligation to notify any person of such revision. Industrologic, Inc. assumes no responsibility for any errors that may appear in this document.
Warning/Disclaimer
Whereas effort has been made to make the information in this document as useful and accurate as possible, Industrologic, Inc. assumes no responsibility for the application, usefulness, or completeness, of the information contained herein. Under no circumstance will Industrologic, Inc. be responsible or liable for any damages or losses including indirect or consequential damages or losses arising from either the use of any information contained within this manual or the use of any products or services referenced within this manual.
Industrologic, Inc. reserves the right to change any product's features, specifications, documentation, warranties, fee schedules, and conditions at any time and without notice.
Industrologic products are provided as printed circuit board level assemblies. Some Industrologic products may include mechanical packaging assessories which are provide for the purchaser's convenience, and are not intended to be final assembly enclosures.
Industrologic products are provided with the understanding that the purchaser will determine fitness for any particular application as well as achieve compliance with any particular specifications or regulations as required or desired for that application.
Warranty
Industrologic, Inc. products are warranted to be free from defects in workmanship or material under normal use and service for a period of one year from date of purchase. Industrologic's warranty is to the original purchaser only, but is extended to you by the Distributor or OEM from whom you purchased the product.
Industrologic's obligation under this Warranty is limited to replacement with a new or repaired unit to the original purchaser. The unit must be returned, and replacements obtained from Industrologic, Inc. or the Distributor or OEM from whom it was purchased.
This warranty will not apply if, in the judgment of Industrologic, Inc., damage or failure of the product has resulted from accident, alteration, misuse, abuse, connection to or operation with incompatible signals or power sources, or improper installation.
Under no circumstances shall Industrologic, Inc. be liable to purchaser or any third party for any loss of profits or other direct or indirect costs, expenses, losses, or consequential damages arising out of or as a result of any defects in or failure of Industrologic products or any part or parts thereof.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EITHER EXPRESSED OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR ANY OTHER MATTER.
Return and Repair Policy
Products purchased in single piece quantities may be returned, if in resellable
condition, for a full refund of the purchase price only, to the original
purchaser, within 30 days of purchase.
Products must be returned by original purchaser with a Return Materials Authorization (RMA) number issued by Industrologic, Inc. or the Distributor or OEM from whom it was purchased, authorizing its return. Current repair or replacement fees and procedures will be related during the issue of the RMA number.
Warranty or repair units must be returned with postage and insurance paid by purchaser. Industrologic, Inc. is not responsible for damages or loss during shipment.
Industrologic DCDC
DC to DC Converter Module Board
The Industrologic DCDC series of boards are isolated DC to DC converter module
boards that are available in a number of input and output voltages and current
ratings. These boards are based on industry standard "brick" style single output
DC to DC converter modules, and the printed circuit carrier board can accept a
wide range of converter module sizes. The carrier board includes convenient screw
terminal block connections and a power LED connected to the output to visually
confirm operation of the converter module.
Mechanical specifications
Carrier board is a single-sided .062" FR-4 glass epoxy printed circuit board.
P.C. Board Dimensions:
Electrical Specifications
Refer to the manufacturer's data sheet for the DC to DC converter module supplied
with the product, or contact Industrologic for information about the DC to DC converter
modules available for use with the carrier board. The carrier board includes an LED
and 1000 ohm series resistor connected to the output to visually confirm operation of
the converter module.
Using the DCDC Series Boards
The DCDC series carrier board may be mounted and used in a number of ways.
The two center holes may be used to mount the board to a standard electrical
box using screws appropriate for the box, or the four outer holes can be used
with standoffs or other mounting devices.
The carrier board has an extension below the screw terminal blocks that contains
holes that can be used with cable ties to secure the wires connected to the
screw terminals. This extension may be removed if desired because it contains
no circuitry required for operation.
end of manual
